Creating surround sound

My Blog List

Wednesday, August 11, 2010

AmpliTube for iPad available from the App Store



Following on from success with the iPhone, IK Multimedia has now released an AmpliTube app for the iPad. Using an iRig interface adapter, the app offers guitar and bass players real-time, mobile tone-modeling and multi-effects solutions on the bigger multi-touch screen of the iPad. It is available in both free and paid-for versions, the latter giving players 11 effects, five amps and cabinets, plus two microphones to play around with.

As with the iPhone setup, users will first need to buy a US$39.99 iRig interface to allow a guitar or bass to be connected to an iPad. That done, players could start with the free version of the app which includes three effects, an amplifier and cabinet setup and a couple of microphones. If the included Delay, Noise Filter and Distortion effects prove too limiting or you yearn to try out different effects/amp configurations then you can add such things piecemeal from the App Store.



Of course, if you want everything at your fingertips from day one then you could just dive in and go for the paid-for version of the app which includes all 11 effects, five amps and cabinets modeled on classic real-world rigs from the likes of Marshall, Fender and Vox, and a dynamic and a condenser microphones. Effects units on offer include chorus, classic 1960s fuzz, distortion, a funky envelope filter and an octaver.

Unlike the iPhone setup, AmpliTube for the iPad makes up to four effects units available at the same time. These are displayed across the top of the screen with the amplifier underneath. Setting up intensity and presence on the effects and activation is not unlike real-world equivalents, all taken care of via the iPad's multitouch screen. Amp tone and drive tweaking is undertaken in a similar fashion and favored setups can be stored in the bank of 36 presets for later easy recall.

As well as amps, effects and microphones the AmpliTube for iPad app also features a tuner and a metronome. There's also an included backing track player to allow players to jam along to imported songs.

The free version of the AmpliTube for iPad can be downloaded from the Apple Store here or the US$19.99 paid-for version from here.

The following demonstration video shows what's available:

Sunday, July 25, 2010


At the beginning of May digiZoid introduced the Zo personal subwoofer, which claimed to enhance a listener's sonic experience by offering increasing degrees of bass contouring to any audio fed through it. Over the past week I've had the chance to take the Zo for a spin. Has it lived up to the claims of its manufacturer? Read on for a full review.

The Zo Personal Subwoofer from digiZoid is a portable audio enhancement device which sits between an audio player and speakers or headphones. Rather than merely amplifying output volume, the Zo offers 32 incremental bass intensity profiles which is said provide the kind of listening experience familiar to those who use a home theater system.

Over the past few days I have had the opportunity to give the Zo a thorough testing with as many different players as I could find. To introduce a degree of fairness I have used the same five music tracks in both MP3 and CD format and the same movie. The film in question is the iconic "Blues Brothers" from 1980, featuring lots of excellent musical moments from the likes of Ray Charles, James Brown, John Lee Hooker and of course the Brothers themselves.

Choosing music tracks was a more difficult task. Although my tastes are varied, I'm not a fan of pop music as such, so the chosen tracks are as follows:

"Money" from Pink Floyd's "Dark Side of the Moon" - bit rate of 320kbps and audio sample rate of 44kHz - an audiophile favorite which offers a rich and varied soundscape and a damn fine bass line to boot
"The Ballad of John Henry" from the album of the same name by Joe Bonamassa - bit rate of 256kbps and audio sample rate of 44kHz - a complex blues exploration by one the genre's brightest stars
"Precious and Grace" by Queens of the Stone Age with Billy Gibbons from "Lullabies to Paralyze" - bit rate of 128kbps and audio sample rate of 44kHz - chosen because as well as a thundering bass there are numerous guitars in there too, I was interested to see how the Zo handled this
"Forest Gardens" from "State of Nature" by Stanley Jordan - bit rate of 256kbps and audio sample rate of 44kHz - there's quite a lot going on here, again I was interested in seeing how the Zo dealt with such complexity.
"Coke" by The Drum from the album "Diskin" - bit rate of 128kbps and audio sample rate of 44kHz - another experiment in diversity.



he Zo's cardboard container sports the words "Blow your mind, not your ears" on the front and contains the device itself, two 3.5mm audio cables (one short, one long), a USB charging cable and a smart start instruction manual. The Zo personal subwoofer is very light at just over an ounce and it's 1.5- x 0.38- x 2.75-inch dimensions won't take up too much room in a pocket or on a desk.

The device has a quality build feel to it, the LightScale contour level indicator on the front is mirror-like, there is a USB charging port to the left, audio input and output to the top and a SmartVector controller to the right. To charge the Zo's battery, the device needs to be connected to a spare USB port on a computer or laptop for around two hours.

For its first test run I opted to try it with my laptop. I have an Altec Lansing subwoofer set up on my PC so I decided to see how the Zo compared with that. The SmartVector controller on the side of the unit is used to switch on the device and scroll through the 32 subwoofer contour profiles. When it's switched off the circuitry allows the unaltered audio signal through to whatever listening apparatus is chosen - in this case, speakers.

First Switch On

When I switched on the Zo for the first time, the LightScale display lit up orange which indicated that the contour level was set to one of the mid-range profiles. I decreased the contour level to the lowest setting of green. The manufacturer recommends that before using the Zo, the audio source is neutralized and the source volume turned down to about 25 percent. Not following the last part could result in quite a surprise, as it did for me. The amplification was enormous for such a small device.

At its lowest green level, it's obvious that the Zo's contouring has kicked in although it seems to be acting more as a source audio boost than a subwoofer. Moving up through the contour profiles subtly increases the level of bass and by the time I was leaving the green zone towards orange the difference between naked desktop subwoofer setup and Zo was negligible. Heading up past orange towards the red and the bass began to sing. I have to say that the red zone proved too bass heavy for my taste though.

digiZoid claims that its SmartVector sound contouring system enhances the audio without causing annoying distortion, and signal clarity certainly was impressive. Even in the bass heavy red zone, the mids and highs were crisp and clear. When I moved my listening experience to a pair of Sennheiser headphones I had to turn down the volume of the audio source yet again.

After running through numerous plays of the MP3s and then CD with both speakers and headphones I loaded the DVD into the optical drive bay and sat back. Again, having to turn down source volume was the first thing I noticed. Although there were subtle differences to the delivery of dialog and action sequences, it was when the music started that the Zo's effects were most noticeable.

digiZoid recommends using the signal bypass function (switching off the Zo) to "obtain a full appreciation of Zo's sound enhancement capabilities." This inevitably leads to a lot of volume tweaking but the differences are nonetheless quite arresting. I did find that re-enabling the Zo cut the volume for a short time while the system kicked in, but pausing the source, enabling the Zo and then re-starting the audio overcame this minor issue.

Moving On

As I went on to test the Zo on both expensive and inexpensive MP3 players, hi-fi systems and televisions the results were similarly positive. Not everything in this soundgarden was rosy though. Having found that different portable situations called for different contour profiles to be engaged, the fact that the Zo only remembered the last setting led to a few more contour searches than I would have liked. As well as the facility to store a few favorite profiles for easy recall, some sort of numerical indication of profile intensity in addition to the color coding would also have been welcome.

I also found the battery charging via USB to be a little restrictive and the apparent lack of battery level indicator did lead to the odd occasion where the device simply cut out without warning. Aside from such minor irritations, the painfully easy to use device significantly improved the listening enjoyment through every audio source I tried, except one. I connected the Zo to the headphone jack of my Marshall guitar amplifier and noticed significant problems.

This is obviously an area for which the Zo was clearly not designed but I was curious as to what contouring would achieve in such a situation. As it was, the intentional signal distortion proved just too much for the personal subwoofer and although it fared slightly better with my HoneyTone personal guitar amplifier, any thoughts of playing with the EQ via the Zo were quickly abandoned and the unit returned to the audio equipment it was created to be used with.

Overall though, and no doubt a testament to how beneficial I found it to be, digiZoid's personal subwoofer was in use more than it wasn't. Over the years I have tried out an awful lot of earphones, headphones, speakers and audio amplifiers. Only the delights of a quite expensive, and much less portable, 5.1 surround sound system has come even close to the subtle but immediately noticeable bass contour changes and electronic signal enrichment offered by the Zo. It's a marvelous piece of kit and a very useful addition to a mobile audio arsenal.

As a bonus, it also extended the battery life of tested portable players as it allowed me to significantly turn down source volume levels.

Saturday, July 24, 2010

MP3 goes 5.1 surround sound with backwards compatibility

Another major CeBIT premiere was the next generation of MP3 technology demonstrated by the Fraunhofer Institute - MP3 Surround technology, which provides a multi-channel listening experience with minimum effort and maximum compatibility. MP3 Surround allows the reproduction of high-quality multichannel sound at bit rates comparable to those currently used to encode stereo MP3 material. Most importantly, the new format offers complete backward compatibility to existing MP3 software and devices: MP3 Surround bit streams are played back as high-quality stereo sound on all current MP3 players. When decoded by MP3 Surround decoders, however, the new format produces full 5.1 channel surround sound! These astounding features are realised by a revolutionary technical approach based on the MP3 standard: MP3 Surround technology encodes multichannel sound by transmitting a stereo audio signal that carries a compatible stereo down mix of the multi-channel material. In addition, a small amount of side information is transmitted characterizing the spatial distribution and attributes of the multi-channel sound image. MP3 Surround was developed by Fraunhofer IIS in collaboration with Agere Systems (www.agere.com). 'Enjoying personal multi-channel audio has been on the wish list of the MP3 user community for quite some time. This is exactly what MP3 Surround has to offer - and it does so at astoundingly low bit rates,' says J'rgen Herre, Chief Executive Scientist of the Audio & Multimedia departments of Fraunhofer IIS in Germany. The new technology enables the user to play back both stereo or surround music from the same MP3 Surround files. This allows for a wide range of MP3 Surround applications such as broadcasting systems or web-based music distribution. Currently a number of commercial music download services offer their music in MP3 stereo. Such services can be seamlessly extended to provide multi-channel MP3, and yet they remain compatible with stereo equipment. The same applies to Internet radios that will be able to stream multi-channel content with little more effort than for stereo broadcasting. Beyond any doubt, this is another milestone in the ongoing success of MP3. The first MP3 Surround software solutions are expected to be available by mid 2004.

Friday, July 16, 2010

AS301DTS USB audio tube – surround sound with a visual treat





Call me old fashioned but when I see the comforting glow of a vacuum tube I know that I'm in for some sonic pleasure. And that's precisely the thinking behind the aim AS301DTS USB audio tube headphone amplifier. OK, so the vacuum tube doesn't actually work, it's designed that way to trigger the very mental connection I opened with. That done, the tiny device then promises to deliver bass-enhanced surround sound to just about any pair of headphones attached to it. Sweet.

The first thing you'll notice when you plug the aim AS301DTS into a USB port is that tube-like glow from the blue light sitting inside the 18 carat gold-topped glass casing. Of course, just like the overall design, it's just for effect and is aimed to establish a mental association with quality sound. The audio enhancement is delivered courtesy of integrated DTS Surround Sensation Headphone Technology.




Along with the VT1610 audio chip, DTS Surround Sensation gives users simulated five-speaker surround sound audio through just about any headphones, while the capacitor-less construction of the aim AS301DTS is said to offer improved performance at the low frequency band. The 0.9 x 1.77 inch, 0.4 ounce device certainly left Gizmag with a positive impression after some limited testing at Computex recently.

The gorgeous audio tube, developed by Taiwan's Formosa21 Inc, is compatible with numerous operating systems as it works from a system's standard USB driver, although users will need to install the software to benefit from the DTS enhanced features. It's connected to and powered by a laptop or computer via an included 90 degree USB adapter and there are sockets for stereo out (for headphones/speakers) and stereo line/mic-in (for its voice clarification feature).






The aim AS301DTS took top spot at the prestigious Computex Taipei Design & Innovation Awards 2010 and will be available shortly for an estimated retail price of JPY3000 (about US$32), although there's no word on availability outside Japan.

The following overview provides a functionality snapshot:

Thursday, July 15, 2010

E3 2010: PlayStation 3 Surround Sound System Announced




New officially branded, all-in-one sound bar coming this fall.

While Sony's primary hardware focus at E3 has been PlayStation Move, they've also introduced a new all-in-one audio solution for the PlayStation 3. Dubbed simply Surround Sound System for the PlayStation 3, the new speaker bar is officially branded with the PlayStation logo, and features a built-in subwoofer and Sony's S-Force PRO simulated surround sound technology.

Inputs wise, the Surround Sound System for PS3 is surprisingly light, with only a single analog RCA input and one optical cable input. Other features include Night Mode, which adjusts the audio to be clearer and more distinguishable at lower levels, and Dialog Mode, which boosts the sound of in-game or in-movie chatter.

In terms of size, Sony clearly wanted to keep the Surround Sound System for PS3 compact, with a total width of just over two feet and a height and depth of roughly 3 inches.

The Surround Sound System for PS3 is geared toward players with neither the space nor the cash for a 5.1 or 7.1 multichannel system, with pricing set at just $199.99. No specific release date was confirmed, but the Surround Sound System for PS3 should be arriving in stores sometime this fall.

For all the latest from E3 2010, stay tuned to IGN.com.

Wednesday, July 14, 2010

Mythos XTR®-50 Wallspeaker



.Perfect for use with ultra-shallow TVs
.Only 1.5 inches (38mm) deep
.Wall mount bracket and table stand included
.The dynamic punch, wide frequency range and broad dispersion of full size speakers
.Aircraft grade extruded Aluminum enclosure
.Anodized Aluminum dome XTDD drivers
.Pure Aluminum dome tweeter



The Future Has Arrived!

Science fiction films have long featured impossibly thin video screens mounted on walls or floating in air. While the floating-in-air technology might be some time off, super shallow video screens are here now. TVs less than 2 inches thick are in stores now and more are on their way. Compared to these super slims, today’s “made for plasma” speakers are too deep and look out of place. If you have an ultra-thin TV you’re going to want to use ultra shallow speakers.




The Definitive Mythos XTR-50 is the first high performance on-wall speaker whose depth matches that of today’s ultra-thin TVs. It is a mere 1.5 inches deep when mounted on a wall, shallower than many ultra-thin TVs when they are wall-mounted with their factory sanctioned mounting hardware. Beyond its utility and clean modern styling the XTR-50 stands out due to its uncompromising sound quality equivalent to full-size speakers.

SPECIFICATIONS

Dimensions (mounted on wall without bracket) :27" H x 6" W x 1-1/2" D (68.6cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :27" H x 6" W x 1-9/16" D (68.6cm x 15.2cm x 40mm)
Dimensions (on table stand) :30" H (76.2cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :92Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum
Product weight (without table stand) :5.1 lbs. (2.3kg)
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black